melt temperature

美 　英

• 網絡熔體溫度；熔融溫度；熔化溫度

例句

Apart from raising the barrel temperature what other techniques can be used to raise the melt temperature?

除了提高料管溫度外，還可以使用其他什么方法來提高融料溫度？

pressure sensor with incorporated melt temperature sensor inserted in the die adaptor near the breaker plate.

壓力傳感器與溫度傳感器整合，置于模頭適配器之中。

edy a poor finish, increasing the melt temperature and mold temperature will also improve surface appearance when molding our materials.

伊迪一個貧困的完成，提高熔體溫度和模具溫度也將改善表面外觀時，我們的成型材料。

Melt temperature and mold temperature had no influence on the hollow ratio when the temperature reached a specific range.

熔體溫度升到一定范圍后對中空率沒有影響；

Do not conside the effect of the melt temperature. Use of the relationship between temperature and viscosity and shear energy formula .

利用溫度和粘度的關系式及剪切能的計算公式，得到了剪切能與熔體溫度的關系式。

The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.

穩定的體積流量和降低熔體溫度對于改善最終產品的質量有重要意義。

The series adjustment system that using melt temperature as main parameters was composed in HTM temperature control system.

在熱媒溫度控制系統中以熔體溫度作為主參數，組成串極調節系統。

The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.

即降低降體溫度、攪拌速度及適當剪切時間有利于細小球形晶粒的形成。

Start by determining the true melt temperature and set the die body to that temperature.

從確定真正的熔體溫度開始，然后按照這個溫度設定口模體的溫度。

With the increase of the melt temperature, the evaporation trend increases.

隨著熔體溫度的增加，揮發趨勢也增大。

two digital temperature indicators showing the melt temperature before pump and before filter disk.

兩個溫度傳感器一個顯示齒輪泵前的熔體溫度，另一顯示濾盤前的溫度。

After put into running, the melt temperature is steady, the running of the regulating valve is smooth, the effect is good.

投入運行后，熔體溫度穩定，調節閥動作平穩，效果良好。

The effects of stabilized a-gent, MFR and melt temperature on degrading behavior were discussed.

對助劑量、熔體溫度等工藝條件對降解行為的影響進行了討論。

The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less.

模具溫度對成型過程的影響較大，熔體溫度的影響相對較小。

Unmelted gels have the same melting point as the surrounding resin, but remained colder than the average melt temperature.

不熔凝膠與周圍樹脂有同樣的熔點，但是受熱溫度比平均溫度低。

Mold temperature, melt temperature, packing pressure, packing pressure time and cooling time are considered as process parameters.

模子的溫度，金屬溫度，填料的壓力，填料的加壓時間及冷卻時間被考慮作為過程參數。

Increased Melt Temperature yields increased Flow.

提高熔融溫度導致增加流動

The results showed that melt temperature and gas delay time interaction is more serious to gas fingering influence.

結果表明：熔體溫度與氣體注射延遲時間的交互作用對“氣指”影響較為嚴重。

Burned or Scorched Parts: Melt temperature may be too high.

典型并發癥：燒焦：塑料熔化溫度過高。

Yet, when the melt temperature was increased, the mold temperature also increases.

但是，當熔體溫度升高，模具溫度也隨之增加。

Large extrusion output , low and equal melt temperature .

擠出量大，熔體溫度低，熔體溫度均勻。

Its melt temperature is hingt and it has proper viscosity and low temperature flexibility.

具有較高的熔融溫度，適宜的粘度和良好的低溫韌性；

The results show that the peak cobalt rodlet temperature doesn't exceed the cobalt melt temperature during these two cases.

結果表明，兩種情況下鈷靶元件最高溫度均未超過其熔點。

How is melt temperature controlled?

如何控制熔煉溫度？

Furnaces Used for Melting Metal or Holding Melt Temperature in Aluminium Melting and Casting Works

鋁熔鑄廠用的熔煉或保溫爐

Simulation study of effects of initial melt temperature on microstructure of liquid metal Na during solidification processes

熔體初始溫度對液態金屬Na凝固過程中微觀結構影響的模擬研究

Try to maintain an even, rapid melt flow Increase injection speed Raise melt temperature Raise mould temperature Increase wall thickness

盡量保持均勻和快速的熔體流動注射速度太低提高熔體溫度提高模具溫度增大壁厚

The application of an automatic thermo-measuring instrumentto the measurement of melt temperature in melted copper

自動測溫裝置在銅熔煉熔體溫度測量中的應用

Prediction of Injection Pressure and Melt Temperature of Injection Molding by Radial Basis Function Network

基于神經網絡技術的注塑成型注射壓力和熔體溫度預測

Parameter control not is precise (mold temperature, melt temperature, cooling time)

參數控制不穩（模溫，料溫，保壓太低或太高，冷卻時間）

Continuous Measurement of Melt Temperature on Special Condition

特殊環境下熔體溫度的連續測量

those having a relatively big impact on warpage include the melt temperature only;

對翹曲變形影響較大的工藝參數為熔體溫度；

Effect of Melt Temperature on the Compound Phase of High Silicon Aluminum Alloy

熔體溫度對高硅鋁合金中化合物相的影響

Study on Injection Molding Melt Temperature

注塑成型熔體溫度的研究

Study on Homogeneity of Glass Melt Temperature in Spout

料盆內玻璃液溫度均勻性的研究

Shorten melt residence time and melt temperature

縮短熔化駐留時間和降低溫度